2015年9月25日星期五

Dry cleaning process of some common faults and approach

Accident: why join after cleaning clothes to the laundry, buttons are increasingly fragmentation problem: a match standard button jacket after conventional dry cleaning twice, a few button appear fracture. Dry cleaning is according to the instructions in the maintenance TAB.
         Reason: with plastic buttons cannot afford conventional dry cleaning cycle in the process of repeated impact force between the rotor cage wall dry cleaning principle
         Responsibility: from the signature of the maintenance do not see any warning on the label, so the responsibility borne by the manufacturer, if a drag on the maintenance TAB horizontal dry cleaning personnel shall bear the responsibility.
        
The accident 2: black bead decorations are melted
         Question: when a material for flash acetate purple clothes in the label instructions after four pce dry cleaning, black bead decorations become soft, melting, leaving only ugly black stain, the clothes have such stains.
         Reason: the decorations cannot bear perc dry cleaning machine washing, as long as it will dissolve into tetrachloroethylene 2 minutes. Maintenance of the label that is marked by guess, is not easy to verify its accuracy.
Responsibility: shall be borne by the manufacturer, cannot return.

The accident three: the issue of metal ornaments
         Question: a piece of fabric RaoBoZi a circle metal decorations in shrink, the phenomenon of wrinkling after dry cleaning.
         Reason: if the decoration is made up of different fibers, the most important thing is to consider each layer shrinkage, so that the dry cleaning after decoration is still very smooth, bright and clean.
         Responsibility: shall be borne by the clothing manufacturers, because he is obviously not the strict operation specifications and quality standards.
         Fixed: sometimes can correct this error. Usually soaked with water wrinkling, reoccupy steam ironing, each fiber layer pressure must be uniform, so that can ensure smooth after wetted.
        

The accident four: coated collar cracked
         Question: is a jacket collar with polyurethane coating. After the dry cleaning, most of the collar stand the dry cleaning, coating along the collar folds appeared coating cracking and spalling phenomena.
         Answer: with a coating of fibers in the normal wear when bending, folding and bending in a bad place can appear small crack, before washing, usually not easy to be seen, but the cleaning solvent penetration, the coating is peeling off from the fiber, responsibility: after a period of normal wear, according to the maintenance of the label that is can withstand the dry cleaning clothes, so responsible for manufacturers

没有评论:

发表评论